Search Results

Home > Materials > Titanium > CPUA CPUA Titanium Commercially Pure and Unalloyed Titanium Alloys are used in industries where their combined high corrosion resistance and good formability is a necessary requirement, but ultimate strength is not. Commercially Pure Titanium Alloys are those which have a Titanium content of no less than 99%, with additional interstitials containing controlled amounts of Nitrogen, Carbon, Hydrogen, Iron and Oxygen making up the balance. The traditionally termed Commercially Pure grades are Grades 1-4. Grade 1 Titanium has the greatest corrosion resistance and formability with a relatively low strength. The pattern reverses through Grades 2 and 3 until we reach Grade 4 Titanium, which is the strongest Commercially Pure Alloy, but with only moderate formability. Grades 7, 11, 16, and 17 are included in the CPUA category because they only contain trace amounts of Palladium (Max. 0.25%) to increase corrosion resistance. Additionally, Grade 26 is included as it possesses similar mechanical qualities to Grades 7 respectively, but with Ruthenium replacing its Palladium. All the grades, shapes, and specifications of Commercially Pure and Unalloyed Titanium found below are available directly through Integ Metals, so please feel free to read through the information on this page for reference, or contact us directly with your requirements. Commercially Pure & Unalloyed Titanium Supplied Shapes • Plate • Sheet • Strip • Coil • Rod • Bar • Ingot • Billet • Seamless & welded tube • Seamless & welded pipe • Wire • Revert Grade One (R50250) Int'l Equivalents ASTM UNS Werkstoff ISO Grade 1 R50250 3.7025 Ti-99.8 Characteristics The purest, softest titanium alloy Exhibits the greatest ductility and cold formability of all commercially pure alloys Displays excellent corrosion resistance in highly oxidizing and moderately reducing conditions Enquire Now Supplied Shapes • Plate • Sheet • Strip • Coil • Rod • Bar • Ingot • Billet • Seamless & welded tube • Seamless & welded pipe • Wire • Revert Grade Two (R50400) Int'l Equivalents ASTM UNS Werkstoff ISO Grade 2 R50400 3.7035 Ti-99.7 Characteristics Moderate strength Good cold formability Good fabricability Excellent corrosion resistance to highly oxidizing media, with or without chlorides Enquire Now Supplied Shapes • Plate • Sheet • Strip • Coil • Rod • Bar • Ingot • Billet • Seamless & welded tube • Seamless & welded pipe • Wire • Revert Grade Three (R50500) Int'l Equivalents ASTM UNS Werkstoff ISO Grade 3 R50550 3.7055 Ti-99.6 Characteristics Stronger version of Grade 2 Similar corrosion resistance to Grade 2 Reasonable cold ductility/formability Enquire Now Supplied Shapes • Plate • Sheet • Strip • Coil • Rod • Bar • Ingot • Billet • Seamless & welded tube • Seamless & welded pipe • Wire • Revert Grade Four R50700 Int'l Equivalents ASTM UNS Werkstoff ISO Grade 4 R50700 3.7065 Ti-99.5 Characteristics Strongest commercially pure Titanium Reduced ductility and formability Good corrosion resistance Enquire Now Supplied Shapes • Plate • Sheet • Coil • Rod • Bar • Ingot • Billet • Seamless & welded tube • Seamless & welded pipe • Wire • Revert Grade Seven (R52400) Int'l Equivalents ASTM UNS Werkstoff ISO Grade 7 R52400 3.7235 - Characteristics Most resistant Titanium Alloy to corrosion in reducing acids Most resistant Titanium Alloy to localised attack in Halide media Mechanical properties equivalent to Grade 2 Titanium Excellent fabricability Enquire Now Supplied Shapes • Plate • Sheet • Coil • Bar • Ingot • Billet • Seamless & welded tube • Seamless & welded pipe • Wire • Revert Grade Eleven (R52250) Int'l Equivalents ASTM UNS Werkstoff ISO Grade 11 R52250 3.7225 Ti-0.15Pd Characteristics Most resistant Titanium Alloy to corrosion in reducing acids Most resistant Titanium Alloy to localised attack in Halide media Mechanical properties equivalent to Grade 2 Titanium Excellent fabricability Enquire Now Supplied Shapes • Plate • Sheet • Coil • Bar • Ingot • Billet • Seamless & welded tube • Seamless & welded pipe • Wire • Revert Grade Twelve (R53400) Int'l Equivalents ASTM UNS Werkstoff ISO Grade 12 R53400 3.7105 Ti-0.3Mo-0.8Ni Characteristics Good strength Meets ASME code for both strength and pressure at elevated temperatures Excellent crevice corrosion resistance Advanced resistance to chlorides Enquire Now Supplied Shapes • Bar • Plate • Sheet • Strip Grade Sixteen (R52402) Int'l Equivalents ASTM UNS Werkstoff ISO Grade 16 R52402 - Ti-0.05Pd Characteristics Lower Palladium version of Grade 7 Titanium Equivalent mechanical properties of Grade 7 Titanium, including high corrosion resistance and good fabricability Enquire Now Supplied Shapes • Plate • Sheet • Strip Grade Seventeen (R52252) Int'l Equivalents ASTM UNS Werkstoff ISO Grade 17 R52252 - Ti-0.05Pd Characteristics Lower Palladium version of Grade 11 Titanium Equivalent mechanical properties to Grade 11 Titanium, including high corrosion resistance and good fabricability Enquire Now Supplied Shapes • Seamless & welded tube • Seamless & welded pipe Grade Twenty-Six (R52404) Int'l Equivalents ASTM UNS Werkstoff ISO Grade 26 R52404 - Ti-0.1Ru Characteristics A Ruthenium containing alternative to Grade 7 Titanium. Equivalent mechanical properties to Grade 7 with similar fabricability properties and corrosion resistance. Enquire Now Contact us now for more info and pricing Back to Top Our Other Titanium Categories Alpha & Near Alpha Alpha-Beta Beta

Home > Materials Materials From the outset, we have always considered the perspective of the engineer when presenting our product range, simply because that is how we started - as engineers ourselves. Our product offering, and scope of service, are as broad as we could possibly make them, purely to ensure that we are able to assist you in the most concise and convenient way possible. ​ We have specifically curated our product selection to meet the prospective needs of typical tasks undertaken within the greater engineering industry so that regardless of the project and sphere of expertise, the sourcing of material is as straightforward as possible. ​ Please take a moment to peruse the materials in which we specialise below, and contact us for any further assistance you require. Aluminium With it's ultra-low density, a protective oxide layer, vast range of alloys - giving a plethora of useful properties - and ready formability, Aluminium is a go-to material for a vast range of engineering applications. ​ Read More Titanium Named after the gods of Greek mythology, titanium casts a large shadow in the world of engineering. Low density, high strength, excellent corrosion resistance, as comfortable at both elevated and cryogenic temperatures, titanium is a god among metals. Read More Nickel Nickel has incredible corrosion resistance, high mechanical strength and excellent creep resistance, all whilst being able to operate at elevated temperatures - a range of qualities vital to both the aeronautical and petrochemical industries alike. Read More Carbon Fibre A member of the new-age family of materials, carbon fibre as a material only came into common use from the 1980s. Strong, incredibly light and easy to shape and form for any role, carbon fibre will only increase in use with time. Read More Steel An iron-based alloy, and the most widely used engineering material, steel is unparallelled in it's range of alloys and, therefore, mechanical properties. As a result, its number of eventual applications is incalculable. ​ Read More Aramids "Aramid" is the name given to a unique class of man-made synthetic fibres which have risen to prevalence due to their strength, high temperature stability and puncture resistance. Found in areas as diverse as bicycle tyres and bullet-proof vests. Read More Contact us now for more info and pricing Back to Top

Home > Shapes > Wire Wire Wire is a mill product directly related to rods and bars. The differing factor here is that they are typically drawn from rod, rather than extruded as a finer bore. Wires are available in a range of additional shapes to the round wire which we're accustomed to, including but not limited to; square, flat, triangular, oval, hexagonal, etc. The dimensional limitations on the definition of "wire" are not more than 25.4mm for round products and 13mm for square. ​ There is a broad range of different wire types for different applications, all requiring different properties. These include; structural wire for uses such as cables for bridges - requiring high tensile strength and good corrosion resistance, spring steel, for automotive suspension and mattresses, requiring good elasticity and material memory, and electrical wires - needing both tensile strength to support themselves over large spans, and good electrical conductivity. ​ We supply all grades of Wire listed below. However, t he materials and applications on this page are listed solely as a guide and do not reflect the limit of our supply, or the uses of said materials. If you have a specific application for which you need particular materials, please do not hesitate to contact us . Aluminium Wire Aluminium Wire 1xxx Series Aluminium Wire Grade Available Shapes 1370 / AW-Al1370 / Al 99.7 Wire 1188 / AW-Al1188 / A91188 / ER1188 Wire 1145 / AW-Al1145 / A91145 Wire 1080 / AW-Al1080 / 3.0285 / Al 99.8 / 1A Wire 1070 / AW-Al99.7 / 3.0275 / Al 99.7 / 2L 48 Wire 2xxx Series Aluminium Wire Grade Available Shapes 2024 / AW-2024 / 3.1355 / AlCu4Mg1 / AlCuMg2 / A92024 Wire 2017 / AW-2017 / 3.1325 / AlCuMg1 / H14 Wire 2014 / AW-2014 / 3.1255 / AlCu4SiMg / H15 Wire 4xxx Series Aluminium Wire Grade Available Shapes 4043 / AW-4043 / A94043 / ER4043 Welding Wire 5xxx Series Aluminium Wire Grade Available Shapes 5456 / AW-5456 / A95456 / AlMg5Mn1 Wire 5454 / AW-5454 / 3.3537 / AlMg3Mn / N51 Wire 5086 / AW-5086 / 3.3545 / AlMg4 / A95086 Wire 5083 / AW-5083 / 3.3547 / AlMg4.5Mn0.7 / N8 Wire 5019 / AW-5019 / A95019 / 3.3555 / AlMg5 Wire 6xxx Series Aluminium Wire Grade Available Shapes 6262 / AW-6262 / A96262 Wire 6005 (A) / AW-6005 (A) / 3.3210 / AlMgSi0.7 / A96005 (A) Wire 7xxx Series Aluminium Wire Grade Available Shapes 7178 / AW-7178 / A97178 / AlZn7MgCu Wire Contact us now for more info and pricing Back to Top Nickel Wire Nickel Wire Commercially Pure & Low-Alloy Nickel Wire Grade Available Shapes Alloy 301 / N03301 Wire Alloy 300 / N03300 Flat Wire, Square Wire, Round Wire, Fine Wire Alloy 270 / N02270 / 2.4050 Wire Alloy 201 / N02201 / 2.4061, 2.4068 / NA12 Wire Alloy 200 / N02200 / 2.4060, 2.4066 / NA11 Wire Corrosion-Resistant Nickel Wire Grade Available Shapes Alloy 59 / Nicrofer 5923 hMo / N06059 / NiCr23Mo16Al / 2.4605 Wire Alloy 20 / Nicrofer® 3620 / N08020 / NiCr20CuMo / 2.4660 Wire Alloy G-30 / Hastelloy G-30 / N06030 / NiCr30FeMo / 2.4603 Wire Alloy C-4 / Hastelloy® C-4 / N06455 / NiMo16Cr16Ti / 2.4610 Flat Wire, Square Wire, Round Wire Alloy C-276 / Hastelloy® C-276 / N10276 / NiCr16Mo15W / 2.4819 Wire Alloy C-22 / Hastelloy® C-22 / N06022 / NiCr21Mo14W / 2.4602 Flat Wire, Square Wire, Round Wire Alloy B-3 / Hastelloy® B-3 / N10675 / NiMo29Cr / 2.4600 Flat Wire, Square Wire, Round Wire Alloy B-2 / Hastelloy® B-2 / N10665 / NiMo28 / 2.4617 Flat Wire, Square Wire, Round Wire Heat-Resistant Nickel Wire Grade Available Shapes Alloy X-750 / Inconel® X-750 / N07750 / NiCr15Fe7TiA / 2.4669 Wire Alloy 718 / Inconel® 718 / N07718 / NiCr19FeNb / 2.4668 Wire Alloy 625 / Inconel® 625 / N06625 / NiCr22Mo9Nb / 2.4856 / NA21 Wire Alloy 617 / Inconel® 617 / N06617 / NiCr23Co12Mo / 2.4663 Wire Alloy 602 CA / 602 CA / N06025 / NiCr25FeAlY / 2.4633 Wire Alloy HR-120 / Haynes® HR-120® / N08120 / NiFe33Cr25Co / 2.4854 Wire Alloy RA333 / Nicrofer 4626 Mo W / N06333 / NiCr26MoW / 2.4608 Wire Alloy 330 / Incoloy® 330 / N08330 / X12NiCrSi35-16 / 1.4886 Wire Alloy 282 / Haynes® 282 / N07208 Wire Alloy 263 / Haynes® 263® / N07263 / NiCo20Cr20MoTi / 2.4650 Wire Alloy 242 / Haynes® 242® / N10242 Wire Alloy 214 / Haynes® 214® / N07214 / NiCr16Al / 2.4646 Wire Alloy X / HX / Hastelloy® X / Incoloy® HX / UNS N06002 / NiCr19Fe19Nb5Mo3 / 2.4665 Flat Wire, Square Wire, Round Wire High-Performance Nickel Wire Grade Available Shapes Alloy 825 / Incoloy® 825 / N08825 / NiCr21Mo / 2.4858 Wire Alloy 800 / Incoloy® 800 / N08800 / X10NiCrALTi 32-21 / 1.4876 Wire Alloy 702 / Inconel® 702 / N07702 Flat Wire, Square Wire, Round Wire Alloy 601 / Inconel® 601 / N06601 / NiCr23Fe / 2.4851 Wire Alloy R-405 / Monel® R-405 / N04405 Wire Alloy 404 / Monel® 404 / N04404 / NiCr6016 / 2.4867 Flat Wire, Square Wire, Round Wire Alloy 401 / Monel® 401 / N04401 / CuNi44Mn1 / 2.0842 Flat Wire, Square Wire, Round Wire Alloy 400 / Monel® 400 / N04400 / NiCu30Fe / 2.4360, 2.4361 / NA13 Flat Wire, Square Wire, Round Wire Controlled-Expansion Nickel Wire Grade Available Shapes Alloy K / Nilo® K, Kovar® & Pernifer® 2918 / K94610 / FeNi28Co18 / 1.3981 Wire Alloy 52 / Nilo® 52 / N14052 / 2.4478 / FeNi52 Wire Alloy 48 / Nilo® 48 / K94800 / FeNi48 / 1.3922, 1.3926 & 1.3927 Wire Alloy 46 / Invar® 46 / K94600 / FeNi46 / 1.3920 Wire Alloy 42 / Nilo® 42 / K94100 / FeNi42 / 1.3917 Wire Alloy 36 / Nilo® 36 / K93600 / FeNi36 / 1.3912 Wire Contact us now for more info and pricing Back to Top Steel Wire Steel Wire Maraging Steel Wire Grade Available Shapes C350 / 1.6356 / K93540 Wire C300 / 1.6358 / K93120 Wire C250 / 1.6359 / K92890 Wire C200 / K92710 Wire Austenitic Stainless Steel Wire Grade Available Shapes 347 / S34700 / 1.4550 / X6CrNiNb18-10 Wire 330 / N08330 / 1.4886 / X12NiCrSi35-16 Wire 321H / S32109 / 1.4878 / X12CrNiTi18-9 Wire 317L / S31703 / 1.4438 / X2CrNiMo18-15-4 Wire 316L / S31603 / 1.4404 / X2CrNiMo17-12-2 Wire 316Ti / S31635 / 1.4571 / X6CrNiMoTi17-12-2 Wire 314 / S31400 / 1.4841 / X15CrNiSi25-20 Wire 310S / S31008 / 1.4845 / X8CrNi25-21 Wire 310 / S31000 / 1.4841 / X15CrNiSi25-20 Wire 309S / S30908 / 1.4828 / X15CrNiSi20-12 Wire 309 / S30900 / 1.4829 / X15CrNi23-13 Wire 305 / S30500 / 1.4303 / X8CrNi18-12 Wire 304V Flat Wire, Square Wire, & Round Wire 304CU / S30430 / SUS XM7 Wire 303SE / S30323 / X10CrNiS18-9 Flat Wire, Square Wire, & Round Wire 302HQ / S30430 / 1.4567 / X3CrNiCu18-9-4 Wire 302 / S30200 / 1.4310 / X10CrNi18-8 Wire 301Si / S3010 / 1.4310 / X10CrNi18-8 Wire 204Cu / S20430 / 1.4597 / X8CrMnCuN17-8-3 Wire 201L / S20103 / 1.4371 / X2CrMnNiN17-7-5 Wire 201 / S20100 / 1.4372 / X12CrMnNiN17-7-5 Wire Martensitic Stainless Steel Wire Grade Available Shapes 455 / UNS S45500 Flat Wire, Square Wire, & Round Wire 450 / UNS S45000 Flat Wire, Square Wire, & Round Wire 440A / UNS S44002 / Werkstoff 1.4116 / EN X50CrMoV15 Flat Wire, Square Wire, & Round Wire 431 / Werkstoff 1.4057 / EN X17CrNi16-2 BS 431S29 Wire 430F / Werkstoff 1.4105 / EN X6CrMoS17 Wire 420LC Wire 420F / UNS S42020 / Werkstoff 1.4197 / EN X22CrMoNiS13-1 Wire 420B / Werkstoff 1.4028 / EN X30Cr13 / BS 420S45 Wire 416 / UNS S41600 / Werkstoff 1.4005 / EN X12CrS13 / BS 416S21 Flat Wire, Square Wire, & Round Wire 410 / UNS S41000 / Werkstoff 1.4006 / EN X12Cr13 / BS 410S21 Flat Wire, Square Wire, & Round Wire Ferritic Stainless Steel Wire Grade Available Shapes 444 / UNS S44400 / Werkstoff 1.4521 / EN X2CrMoTi18-2 Wire 436 / UNS S43600 / Werkstoff 1.4526 / EN X6CrMoNb17-1 Flat Wire, Square Wire, & Round Wire 434 / UNS S43400 / Werkstoff 1.4113 / EN X6CrMo17-1 / BS 434S20 Flat Wire, Square Wire, & Round Wire 430Li Flat Wire, Square Wire, & Round Wire 430 / UNS S43000 / Werkstoff 1.4016 / EN X6Cr17 / BS 430S17 Wire Duplex Stainless Steel Wire Grade Available Shapes 2507 / F53 / 1.4410 / S32750 / X2CrNiMoN25-7-4 Wire 2304 / F68 / 1.4362 / S32304 / X2CrNi23-4 Wire 2205 / 318LN / F60 / F51 / 1.4462 / S32205 / S31803 / X2CrNiMoN22-5-3 Wire Precipitation - Hardening Stainless Steel Wire Grade Available Shapes AM350 / UNS S35000 Flat Wire, Square Wire, & Round Wire 17-7 PH / UNS S17700 Flat Wire, Square Wire, & Round Wire 15-7 Mo / UNS S15700 Flat Wire, Square Wire, & Round Wire PH 13-8 Mo® / UNS S13800 / Werkstoff 1.4534 Wire Contact us now for more info and pricing Back to Top Titanium Wire Titanium Wire CPUA Titanium Wire Grade Available Shapes Grade 1 / R50250 / 3.7025 / Ti-99.8 Wire Grade 11 / R52250 / 3.7225 / Ti-0.15Pd Wire Grade 12 / R53400 / 3.7105 / Ti-0.3Mo-0.8Ni Wire Grade 2 / R50400 / 3.7035 / Ti-99.7 Wire Grade 3 / R50550 / 3.7055 / Ti-99.6 Wire Grade 4 / R50700 / 3.7065 / Ti-99.5 Wire Grade 7 / R52400 / 3.7235 Wire Alpha Titanium Wire Grade Available Shapes 6-2-4-2 / R54620 / 3.7145 / Ti-6Al-2Sn-4Zr-2Mo Wire Grade 9 / R56320 / 3.7195 / Ti-3Al-2.5V Wire Alpha-Beta Titanium Wire Title Available Shapes Ti-6Al-6V-2Sn / R56620 Wire Ti-6Al-7Nb / R56700 Wire Grade 29 / R56404 / Ti-6Al-4V-0.1Ru Wire Grade 23 / R56407 / 3.7164 / Ti-6Al-4V-ELI Wire Grade 5 / R56400 / 3.7165 / Ti-6Al-4V Wire Beta Titanium Wire Grade Available Shapes R58010 / Ti-13V-11Cr-3Al Wire 15-3-3-3 / R58153 / Ti-15V-3Cr-3Sn-3Al Wire Grade 21 / R58210 / Ti-15Mo-2.7Nb-3Al-0.2Si Wire Contact us now for more info and pricing Back to Top Other Shapes Tubes & Pipes Shapes & Profiles Revert Sheets & Plates Billets Fixings & Fastenings Cast Products Bars & Rods

Home > Materials > Aluminium > 5xxx 5xxx Series Aluminium The primary alloying element of 5xxx Series Aluminium Alloys is Magnesium, which helps to create moderate to high-strength alloys, with the highest strength of all non-heat-treatable alloys. For applications where temperatures exceed 65℃, alloys featuring no more than 3.5% Magnesium are recommended, in addition to a lower temper, to stave off stress corrosion cracking. ​ They are a precipitation hardened alloy, with properties similar to 3xxx series, but with higher strength and improved corrosion resistance. In this vein, plates tempered to H116 and H321 offer excellent saline corrosion protection and are used extensively in the marine industry. Additionally, this series is easy to anodize, which offers greater corrosion resistance, as well as offering different colour options. ​ As a grade regarded as “general purpose” they find themselves used in many different industries including; architecture and construction, automotive, marine, shipbuilding, bridge construction, electronics, electronics and energy. ​ All alloys are readily weldable, with 5xxx Series Alloys offering the strongest weld strength of all Aluminium Alloys. They are not a grade recommended for machining, however. ​ We supply all grades of 5xxx Series Alloys, so please feel free to contact us with your direct requirements. Available 5xxx Series Alloys Supplied Shapes Plate Sheet Alloy 5005 Int'l Equivalents AA EN UNS DIN BS 5005 AW-5005 A95005 AlMg1(B) N41 Characteristics Moderate strength Excellent weldability Excellent resistance to atmospheric corrosion Ideal for decorative anodising Enquire Now Supplied Shapes Rod Bar Wire Tube Profiles Alloy 5019 Int'l Equivalents AA EN UNS Werkstoff DIN 5019 AW-5019 A95019 3.3555 AlMg5 Characteristics High strength Excellent corrosion resistance against seawater and weathering Enquire Now Supplied Shapes Plate Sheet Strip Coil Alloy 5049 Int'l Equivalents AA EN Werkstoff DIN UNS 5049 AW-5049 3.3527 AlMg2Mn0.8 A95049 Characteristics Good strength Good workability to increase strength, at the cost of ductility Very good corrosion resistance Very good weldability Enquire Now Supplied Shapes Plate Sheet Coil Rod Bar Tube Pipe Alloy 5052 Int'l Equivalents AA EN Werkstoff DIN UNS 5052 AW-5052 3.3523 AlMg2.5 A95052 Characteristics Moderate to high strength Excellent corrosion resistance to seawater Good weldability Good fatigue strength Good cold formabilty Enquire Now Supplied Shapes Plate Sheet Coil Rod Bar Wire Tube Custom Extrusions Alloy 5083 Int'l Equivalents AA EN Werkstoff DIN BS 5083 AW-5083 3.3547 AlMg4.5Mn0.7 N8 Characteristics Highest strength non-heat treatable alloy Excellent resistance to corrosion from seawater and chemical attack Maintains excellent strength after welding Enquire Now Supplied Shapes Plate Sheet Coil Rod Bar Tube Pipe Wire Custom extrusions Alloy 5086 Int'l Equivalents AA EN Werkstoff DIN UNS 5086 AW-5086 3.3545 AlMg4 A95086 Characteristics Higher strength than 5052, but less than 5083 Very good weldability Strengthened by cold working Excellent corrosion resistance to seawater Enquire Now Supplied Shapes Sheet Coil Alloy 5182 Int'l Equivalents AA EN UNS DIN 5182 AW-5182 A95182 AlMg4.5Mn0.4 Characteristics Moderate strength Excellent weldability High ductility Good corrosion resistance Lowest electrical conductivity of all 5xxx series alloys Enquire Now Supplied Shapes Plate Sheet Alloy 5251 Int'l Equivalents AA EN Werkstoff DIN BS 5251 AW-5251 3.3525 AlMg2Mn0.3 N4 Characteristics Moderate strength Very good weldability Work hardens very quickly High ductility Excellent corrosion resistant to seawater Enquire Now Supplied Shapes Welding Rod Welding Bar Alloy 5356 Int'l Equivalents AA EN Werkstoff DIN BS 5356 AW-5356 3.3556 AlMg5 2901 Characteristics One of the most common aluminium welding alloys Excellent corrosion resistance High shear strength Enquire Now Supplied Shapes Plate Sheet Coil Tread Plate Bar Tube Wire Custom Extrusions Alloy 5454 Int'l Equivalents AA EN Werkstoff DIN BS 5454 AW-5454 3.3537 AlMg3Mn N51 Characteristics Moderate to high strength Very good corrosion resistance to seawater Possesses high fatigue strength Good formability Good weldability Enquire Now Supplied Shapes Plate Sheet Rod Bar Wire Tube Custom Extrusions Alloy 5456 Int'l Equivalents AA EN UNS DIN 5456 AW-5456 A95456 AlMg5Mn1 Characteristics Wrought equivalent of 5356 welding alloy Good strength Excellent resistance to saltwater corrosion Enquire Now Supplied Shapes Plate Sheet Tread Plate Tube Round Bar Rectangular Bar Hexagonal Bar Custom Extrusions Alloy 5754 Int'l Equivalents AA EN Werkstoff DIN 5754 AW-5754 3.3535 AlMg3 Characteristics Good strength Excellent cold workability Excellent resistance to saltwater corrosion Commonly used for flooring in marine environments Enquire Now Contact us now for more info and pricing Back to Top Our Other Aluminium Series 1000 Series 2000 Series 3000 Series 4000 Series 6000 Series 7000 Series 8000 Series

Home > Marine > Industries Marine The Marine Industry poses a raft of requirements for engineering materials. The first one that comes to mind is the issue of corrosion many materials face in saltwater solutions, so resistance to these events is a must. With a specific weight of 1.025Kg/l, marine structures must also be incredibly strong to withstand the forces inflicted by seawater, both stationary and under pressure from, let alone the weight of ships and liners themselves. Often within the world of engineering, there are crossovers within industries, and this is also true of the Marine industry. As well as all of the vessels used at sea level, including; boats, yachts, desalination plants etc, we also have to consider the uses of equipment which aren't utilising the sea itself, but are more interested in what lies beneath. Oil & Gas, for example, sits neatly within this particular segment, and the materials used must withstand both the marine environment and the chemical. ​ The materials and applications on this page are listed solely as a guide and do not reflect the limit of our supply, or the uses of said materials. If you have a specific application for which you need particular materials, please do not hesitate to contact us . Aluminium in the Marine Industry Uses Hulls Super structures Masts Winches Scuba bottles Stairs Railings Engine components Fittings Characteristics Straightforward to form into complex shapes, by drawing, extruding etc. May be joined by welding, bonding and riveting, including to different materials Excellent corrosion resistance to both fresh and seawater High strength Lightweight, aiding manoeverability, reducing fuel consumption and increasing performance May be anodised to increase corrosion resistance, reduce scratching and match colouring aesthetics Grades 1085 5049, 5083, & 5454 Enquire Now Contact us now for more info and pricing Back to Top Marine Aluminium Nickel in the Marine Industry Uses Hulls Propeller shafts Heat Exchangers Evaporator Bodies Tubes & Pipes for water, steam, and hydraulic fluids Desalination plant equipment Characteristics Excellent corrosion resistance to saltwater, chlorides and aqeuous solutions Very high strength Superior high temperature properties A very useful alloy in Stainless Steel Fit and forget - practically maintenence free Grades 400 & K-500 600 & 625 Enquire Now Contact us now for more info and pricing Back to Top Marine Nickel Steel in the Marine Industry Uses Hulls Super structures Masts Rigging Fixtures Fittings Anchors Marine structures including bridges & drilling platforms Characteristics Straightforward to form into required shapes Austenitic Stainless and Duplex Steels offer very good corrosion resistance to freshwater, salt water and chlorides High strength to build marine structures including cranes and bridges, as well as ships and shipping containers Easy to join via welding and riveting Grades 316L 329 LDX 2101 Enquire Now Contact us now for more info and pricing Back to Top Marine Steel Titanium in the Marine Industry Uses Structural yacht fittings Engine impellers & Turbines Anchors Tubes & Pipes for water, steam & hydraulic fluids Tubes & Pipes for saline solutions Characteristics Superior strength to weight ratio Excellent corrosion resistance to freshwater, sea water, aqeuous and gaseous corroding media Very high specific strength Very lightweight Exceptional high temperature characteristics Grades Grade 2 Grade 5 Enquire Now Contact us now for more info and pricing Back to Top Marine Titanium Carbon Fibre in the Marine Industry Uses Boat hulls Superstructures Masts Kayaks Canoes Paddles Rowing boats Oars Characteristics Straightforward to form into complex shapes Excellent corrosion resistance High strength - may be used from smaller vessels to superyachts Very lightweight, allowing superior maneuverability, lower fuel consumption and increased performance Grades 3K 6K 9K 12K Hybrid Enquire Now Contact us now for more info and pricing Back to Top Marine Carbon Fibre Aramids in the Marine Industry Uses Sails Structural reinforcement of hulls , masts, etc. Fireproof barriers Characteristics Straightforward to form into complex shapes Excellent corrosion resistance High strength Very lightweight Fire retardant - useful for safety barriers/liners Puncture resistant, making Aramids vital for composite hull Grades Kevlar® Nomex® Enquire Now Contact us now for more info and pricing Back to Top Marine Aramids

Home > About Us Overview About Us Integ Metals Ltd. are metal and composites suppliers, headquartered in London, England. Our areas of expertise are in the supply of Aluminium, Nickel, Steel, Titanium, Carbon Fibre and Aramids, and in the supply of said materials to the Aeronautical, Automotive, Construction, Energy, Leisure, Marine, Medical and Petrochemical industries. Outside of this scope our reach extends further by being able to source other requested materials, grades, shapes and dimensions, as our customers so require. Moreover, all materials herein have the option of the application of suitable coating, plating and finishing to meet our customer’s specifications. In addition, all materials may be cut to our customers specified dimensions. Services Services The international supply of all commercially available grades of Aluminium, Nickel, Steel, Titanium, Carbon Fibre and Aramids. Individual cutting of said materials to the customer’s specifications. Plating/anodizing/finishing materials to suitable specifications. Mission Statement Mission Statement Our prime corporate objective is to further global cohesion by using the field of Metallurgy to equip, facilitate, educate, motivate and inspire those in the Engineering Industry. Having untapped resources to many of the industry's harder to find materials, as well as regular access to standard mill items, our services take the pressure and stress out of sourcing materials and allow Engineers to do what they do best – engineering our future. We endeavour to achieve this by selling the best quality products at competitive prices and in the fastest possible times to people working in all corners of the Engineering community. ​ Through our social media feed, we intend to share this message, by making metallurgical information engaging and exciting to read, including their uses, unique properties and characteristics, as well as news on the Metallurgy and Engineering industries as a whole. ​ We pride ourselves in our level of customer service and are only too happy to facilitate customer requests to satisfy their needs for their individual projects.

Home > Materials > Steel > Alloy Alloy Steel Alloy Steels have additional alloying elements such as vanadium, chromium, and nickel, which are in quantities greater than other accepted resident interstitial elements. These may be formulated for greater strength, better toughness, higher hardenability, or any combination of these. ​ They are usually employed in demanding, high-wear roles that also require greater strength, such as driveshafts, axles, crankshafts, and gearsets. ​ Integ Metals supplies 28 different grades of alloy steel, so please contact us to place an order with your specific requirements, or read on for more information. Alloy Steel Supplied Shapes Round Bar 535A99 (EN31) Int'l Equivalents SAE Werkstoff ISO 52100 1.3505 100Cr6 Characteristics A high-carbon alloy through hardened steel Supplied in the spherodised annealed condition Excellent external hardness of 711HB, with a hardened zone deeper than that of case hardened steels Enquire Now Supplied Shapes Round Bar Square Bar Hexagonal Bar Flat Bar 605M36/T (EN16/T) Int'l Equivalents SAE Werkstoff ISO - - - Characteristics A low-alloy manganese molybdenum through-hardened steel High tensile strength - up to 930N/mm² in smaller diameters Excellent ductility and good resistance to shock Readily machineable Enquire Now Supplied Shapes Round Bar Square Bar 655M13 (EN36B) Int'l Equivalents SAE Werkstoff ISO 3415 1.5752 15NiCr13 Characteristics A nickel-chromium case hardened steel Hard, wear-resistant case with excellent toughness and a core strength of 850 - 1230N/mm² Used for heavy duty components subject to high-stress Enquire Now Supplied Shapes Round Bar 665M17 (EN34) Int'l Equivalents SAE Werkstoff ISO 4615 - - Characteristics A 2% nickel-molybdenum medium case-hardened steel alloy Hard, wear-resistant case with excellent shock resistance and fatigue strength and a core strength of 770N/mm² Enquire Now Supplied Shapes Round Bar 708M40 (EN19A) Int'l Equivalents SAE Werkstoff ISO 4140 1.7225 42CrMo4 Characteristics A 3/4% nickel-chromium case-hardening steel Hard, wear resistant case with a core strength of 770N/mm² May be used as an alternative to 655M17 Enquire Now Supplied Shapes Round Bar Square Bar Hex Bar Flat Bar Sheet 709M40 (EN19) Int'l Equivalents SAE Werkstoff ISO 4140 1.7225 42CrMo4 Characteristics A nickel-chromium case hardened steel Hard, wear-resistant case with excellent toughness and a core strength of 850 - 1230N/mm² Used for heavy duty components subject to high-stress Enquire Now Supplied Shapes Round Bar Flat Bar 722M24 (EN40B/T) Int'l Equivalents SAE Werkstoff ISO - 1.7361 32CrMo12 Characteristics A nitrided, chromium-molybdenum steel Hard, wear-resistant case with excellent toughness Nitriding occurs at relatively low temperatures, leaving a scale-free surface with minimal distortion Enquire Now Supplied Shapes Round Bar 817M40 (EN24) Int'l Equivalents SAE Werkstoff ISO 4340 1.6565/1.6582 - Characteristics A 2% nickel-molybdenum medium case-hardened steel alloy Hard, wear-resistant case with excellent shock resistance and fatigue strength and a core strength of 770N/mm² Enquire Now Supplied Shapes Round Bar Square Bar 826M40 (EN26) Int'l Equivalents SAE Werkstoff ISO - 1.6745 40CrNiMo6 Characteristics A low-alloy case-hardened steel Hard, wear-resistant case with as-quenched surface hardness of 341 - 375HB Exhibits high hardenability and good weldability Enquire Now Supplied Shapes Round Bar 835M30 (EN30B) Int'l Equivalents SAE Werkstoff ISO 9315 1.6657 14NiCrMo13-4 Characteristics A nickel-chromium case-hardened steel Hard, tough, shock resistant case with a core strength of 850 - 1230N/mm² Used to make components subject to high stress, heavy duty applications Enquire Now Supplied Shapes Round Bar Square Bar 8620 (EN362) Int'l Equivalents SAE Werkstoff ISO 8620 1.6523 20NiCrMo2-2 Characteristics A low-alloy case-hardened steel Hard, wear-resistant case with as-quenched surface hardness of 341 - 375HB Exhibits high hardenability and good weldability Enquire Now Supplied Shapes Round Bar 945M38 (EN100) Int'l Equivalents SAE Werkstoff ISO - 1.6723 15NiCrMo16-5 Characteristics A 4.5% nickel-chromium-molybdenum case-hardened steel Hard, wear-resistant case with a core strength of 1310N/mm² Case-hardened qualities may be exhibited over a large section Enquire Now Contact us now for more info and pricing Back to Top Our Other Steel Categories Carbon/Engineering Weathering Steel Precipitation Hardening Case Hardening Austenitic Maraging Through Hardening Martensitic Nitriding Ferritic Structural Steel Duplex

Home > Materials > Nickel > Corrosion Resistant Corrosion-Resistant Nickel Alloys Corrosion-resistant Nickel Alloys are those which have been specifically developed to be impermeable to a broad range of corrosive media. Nickel, in itself, naturally has great corrosion resistance to a range of harsh environments due to the naturally forming passivation layer of nickel oxide on its surface. The alloys developed to possess enhanced corrosion resistance have large amounts of chromium and molybdenum to increase resistance to oxides, halides, sulfides, and nitrides, as well as stress-corrosion and pitting resistance. ​ These alloys are employed in petrochemical plants, refineries, chemical production, waste incinerators, pulp & paper production, and many more where resistance to aggressive corrosive attack is required. ​ Integ Metals supply nine grades of corrosion-resistant nickel, so please read below for information of the specific gardes and shapes we offer, or contact us directly with your specific requirements. Corrosion Resistant Nickel Alloys Supplied Shapes Strip Coil Foil Wire in round, flat and square profiles Alloy B-2 Int'l Equivalents Trade Name UNS EN Werkstoff Hastelloy® B-2 N10665 NiMo28 2.4617 Characteristics Excellent corrosion resistance to a wide range of aggressive, corrosive media, including hydrochloric and sulfuric acids, as well as phosphoric acid. Excellent resistance to stress-corrosion cracking and pitting Enquire Now Supplied Shapes Strip Coil Foil Ribbon Wire in round, flat and square profiles Alloy B-3 Int'l Equivalents Trade Name UNS EN Werkstoff Hastelloy® B-3 N10675 NiMo29Cr 2.4600 Characteristics B-3 is an evolution of B-2 with improved thermal stability, achieved by reducing detrimental inter-metallic phases. Greater ductility and fabricability than B-2 Enquire Now Supplied Shapes Plate Sheet Strip Coil Foil Billet Bar Tube Pipe Wire in round, flat and square Alloy C-22 Int'l Equivalents Trade Name UNS EN Werkstoff Hastelloy® C-22 N06022 NiCr21Mo14W 2.4602 Characteristics Resistant to both oxidizing and non-oxidizing chemicals Protection from pitting, crevice attack, and stress corrosion cracking Excellent resistance to chloride-induced pitting Very ductile Excellent weldability Easily fabricated Enquire Now Supplied Shapes Plate Sheet Coil Strip Billet Bar Wire Pipe Tube Alloy C-276 Int'l Equivalents Trade Name UNS EN Werkstoff Hastelloy® C-276 N10276 NiCr16Mo15W 2.4819 Characteristics Ductile Easy to form and weld Excellent resistance to stress corrosion cracking in chloride environments Can withstand both oxidizing and non-oxidizing acids Resistant to pitting and crevice attack from chlorides and other halides Very resistant to sulfide stress cracking and stress corrosion cracking in sour, oilfield environments Enquire Now Supplied Shapes Strip Coil Foil Flat, Round, Square Wire Alloy C-4 Int'l Equivalents Trade Name UNS EN Werkstoff Hastelloy® C-4 N06455 NiMo16Cr16Ti 2.4610 Characteristics Resistant to many aggressive chemicals, in particular hydrochloric acid, sulfuric acid, and chlorides High resistance to HAZ sensitization Ductile Easy to form and weld Excellent resistance to stress corrosion cracking in chloride environments Able to withstand both oxidizing and non-oxidizing acids, and is resistant to pitting and crevice attack in the presence of chlorides and other halides Enquire Now Supplied Shapes Plate Sheet Strip Billet Bar Wire Pipe Tube Alloy G-30 Int'l Equivalents Trade Name UNS EN Werkstoff Hastelloy G-30 N06030 NiCr30FeMo 2.4603 Characteristics Highly resistant to “wet process” phosphoric acid Excellent resistance to other oxidizing acids, such as nitric acid, and solutions containing nitric acid. Decent resistance to reducing acids, such as hydrochloric and sulfuric acids Enquire Now Supplied Shapes Plate Sheet Tube Pipe Rod Bar Alloy G-3 Int'l Equivalents Trade Name UNS EN Werkstoff Hastelloy G-3 N06985 NiCr22Mo7Cu 2.4619 Characteristics Very good resistance to a wide range of corrosive media, under oxidizing conditions Excellent resistance to crevice and pitting corrosion and to stress corrosion cracking Excellent resistance to corrosion in reducing media Enquire Now Supplied Shapes Sheet Plate Strip Round Bar Rod Pipe Billet Wire Alloy 20 Int'l Equivalents Trade Name UNS EU Werkstoff Nicrofer® 3620 N08020 NiCr20CuMo 2.4660 Characteristics A grade created specifically to withstand corrosion from sulfuric acid, resulting in excellent resistance to hot sulfuric acid Resistant to intergranular corrosion in the as-welded condition due to niobium content Excellent chloride stress corrosion cracking resistance Enquire Now Supplied Shapes Sheet Plate Strip Coil Rod Bar Tube Billet Wire Alloy 59 Int'l Equivalents Trade Name UNS EN Werkstoff Nicrofer 5923 hMo N06059 NiCr23Mo16Al 2.4605 Characteristics Excellent resistance to a broad range of corrosive media under oxidizing and reducing conditions Excellent resistance to crevice and pitting corrosion Excellent resistance to stress corrosion cracking Enquire Now Contact us now for more info and pricing Back to Top Our Other Nickel Categories CPLA Heat-Resistant High-Performance Controlled-Expansion

Home > Industries > Leisure Leisure The industries of leisure, sport and recreation may be wrongly considered of less importance when it comes to materials selection for optimum performance than other heavy industries within engineering. However, this is a most unforgivable misconception when we consider that the international leisure, sports and recreation industries are worth tens of billions of pounds to the global economy each year, not to mention that the competition and engagement aspects give all citizens the ability to support a team, watch live action and emulate their sporting icons by buying and using the same equipment which their heroes use. Key considerations needed to be employed when selecting materials for products in this industry are; strength - most sports equipment is subject to very high stresses, formability - sports consumer products must be formed into the optimal shapes to ensure maximum performance, corrosion resistance - many activities take place in outdoor and marine situations, so the ability to withstand the elements and salt water are imperitive. ​ The materials and applications on this page are listed solely as a guide and do not reflect the limit of our supply, or the uses of said materials. If you have a specific application for which you need particular materials, please do not hesitate to contact us . Aluminium in the Leisure Industry Uses Bicycles frames and components Frames for racquet sports Lacrosse sticks Ice hockey sticks Ice skate chassis Fishing reels RC Car Chassis Caribiners for climbing Scuba cylinders Go-Kart components, including engine and components Motorcross bike components Skateboard trucks Consumer goods, including laptop chassis, mobile telephones, watches etc. Cookware Characteristics Straightforward to form into complex shapes, extruded, rolled, drawn and joined Excellent corrosion resistance High strength to weight ratio Readily anodised for further corrosion/damage protection and colour accessorising Very lightweight Low modulus of elasticity Grades 1050, 1060, 1100, 1200, & 1235 3004 4015 & 4925 5083 & 5154 6061, 6063, 6082, & 6086 7012, 7046, & 7075 Enquire Now Contact us now for more info and pricing Back to Top Leisure Aluminium Nickel in the Leisure Industry Uses Nickel-plated consumer goods Rechargable Lithium-Nickel-Manganese-Cobalt-Oxide batteries I.e. those used in E-bikes Characteristics Excellent corrosion resistance to the elements and chemicals High strength Superior hardness, meaning that Nickel-plated goods keep their aesthetic over time Good electrical conductivity A useful alloy in Sports, Leisure and Recreation goods made from Stainless Steel Grades Ni-Co 600 & 625 718 Enquire Now Contact us now for more info and pricing Back to Top Leisure Nickel Steel in the Leisure Industry Uses Bicycle frames, forks and components Climbing caribiners, cabling, expansion bolts, axes etc. Hunting knives Gun and rifle barrels and components Fishing reels and hooks Consumer goods Ice skate blades Gym equipment Scuba cylinders Golf clubs Ice skate blades Cooking equipment Characteristics Relatively inexpensive Stainless Steels have good corrosion resistance - useful for outdoor pastimes, in addition to proven plating methods Good strength for load bearing roles/activities Broad range of alloys to select from for different applications Straightforward to shape, machine, cut and join Good stiffness Most abundant material used in Leisure and Recreation Grades 304 & 316 Enquire Now Contact us now for more info and pricing Back to Top Leisure Steel Titanium in the Leisure Industry Uses Bicycle frames and components Diving knives Cutlery for camping Golf club faces and heads Fishing reels & line Climbing caribiners & bolts Consumer goods Skis Ski poles Tennis racquets Hiking equipment Characteristics High strength to weight ratio Excellent corrosion resistance - suitable for outdoor/marine pastimes Relatively hard, making it difficult to scratch/damage Very high specific strength Low modulus of elasticity Grades Grade 5 & Grade 9 Enquire Now Contact us now for more info and pricing Back to Top Leisure Titanium Carbon Fibre in the Leisure Industry Uses Golf club shafts Fishing Rods Bicycle frames, forks and components Surfboards Consumer goods Skis and ski poles Snowboards Racquet sports frames Ice hockey sticks Rowing hulls and oars Kayaks and paddles Crash helmets Pool cues Wind surfing boards and masts Characteristics Straightforward to form into complex shapes Excellent corrosion resistance for outdoor and marine use Very high strength Low modulus of elasticity giving excellent stiffness Unrivalled low weight Aesthetically pleasing - often left in as-lacquered form Grades 3K 6K 9K 12K Hybrid Enquire Now Contact us now for more info and pricing Back to Top Leisure Carbon Fibre Aramids in the Leisure Industry Uses Crash Helmets Sails Tyres Boat hulls Yacht sails Motorbike gloves and racesuits Characteristics Straightforward to form into complex shapes Excellent corrosion resistance High strength Very lightweight Fire retardent Resistant to electrical conductivity Grades Kevlar® Nomex® Enquire Now Contact us now for more info and pricing Back to Top Leisure Aramids

Home > Materials > Steel > Maraging Maraging Steel Maraging steels are steels with 18% nickel as their primary strengthening element and either cobalt (C-alloys) or titanium (T-alloys) as their secondary alloying elements. The name derives from the substructure of the material and its subsequent treatment used to give this material its remarkable properties, which are the martensitic substructure (Mar) and aging. These two features combine to offer a material with excellent tensile and yield strengths, toughness, fatigue strength, hardness, workability, weldability, machinability, and a low coefficient of thermal expansion. ​ These alloys are used in the extremes of industry, where their properties offer unrivaled performance in applications such as landing gear on aircraft, jet engine and helicopter driveshafts, transmission shafts, couplings, and motorsport components. ​ With their aptitude for machining in the annealed condition and excellent post-machining surface finish, these alloys are usually supplied in bar or billet form, but other shapes are also available. ​ All the below grades and shapes of maraging steels listed below are supplied by Integ Metals, so please feel free to contact our experts today for more information or to place an order. Maraging Steel Supplied Shapes Bar Rod Billet Wire C200 Int'l Equivalents SAE Werkstoff UNS C200 - K92710 Characteristics An 18Ni, low-carbon maraging steel with 8.5% cobalt High ultimate tensile and yield strengths - 1379MPa (Rm) and 1379MPa (Rp 0.2) respectively Excellent toughness High Impact strength Excellent fatigue strength Low expansion coefficient Excellent workability and formability Enquire Now Supplied Shapes Plate Sheet Round bar Flat bar Seamless & welded pipe Seamless & welded tube Wire Billet Forgings C250 Int'l Equivalents SAE Werkstoff UNS C250 1.6359 K92890 Characteristics An 18Ni, low-carbon maraging steel with 7.5% cobalt High ultimate tensile and yield strengths - 1790MPa (Rm) and 1760MPa (Rp 0.2) respectively Excellent toughness High Impact strength Excellent fatigue strength Low expansion coefficient Excellent workability and formability Enquire Now Supplied Shapes Plate Strip Bar Wire Billet Forgings C300 Int'l Equivalents SAE Werkstoff UNS C300 1.6358 K93120 Characteristics An 18Ni, low-carbon maraging steel with 9% cobalt High ultimate tensile and yield strengths - 2027MPa (Rm) and 1999MPa (Rp 0.2) respectively Excellent toughness High Impact strength Excellent fatigue strength Low expansion coefficient Excellent workability and formability Enquire Now Supplied Shapes Plate Sheet Bar Seamless & welded pipe Seamless & welded tube Wire Billet Forgings C350 Int'l Equivalents SAE Werkstoff UNS C350 1.6356 K93540 Characteristics An 18Ni, low-carbon maraging steel with 12% cobalt High ultimate tensile and yield strengths - 2413MPa (Rm) and 2344MPa (Rp 0.2) respectively Excellent toughness High Impact strength Excellent fatigue strength Low expansion coefficient Excellent workability and formability Enquire Now Contact us now for more info and pricing Back to Top Our Other Steel Categories Carbon/Engineering Structural Steel Precipitation Hardening Case Hardening Austenitic Through Hardening Martensitic Nitriding Ferritic Alloy Steel Duplex

Home > Materials > Aluminium > 1xxx 1xxx Series Aluminium Grade 1xxx Series Aluminium Alloys are categorised as commercially pure and unalloyed, with a minimum 99% Aluminium content. As a pure material, aluminium is ductile, easy to shape, easy to draw, and is also a good conductor of electricity and heat. With these characteristics available, Grade 1xxx Series Alloys are used chiefly in the electrical industry, where they are used in both overhead powerlines, when reinforced with carbon fibre, as well as low-voltage underground cables. ​ Their light weight and easy formation into complex shapes makes them vital to the aeronautical industry, whilst excellent thermal propeties encourage its use in catering foil and food packaging. ​ We supply all common grades of 1xxx Series Alloys, in all popular shapes and forms, so please feel free to contact us with your direct requirements. Available 1xxx Series Alloys Supplied Shapes Plate Sheet Tread Plate Tape Foil Round Bar Square Bar Rectangular Bar Hexagonal Bar Custom Extrusions 1050A Aluminium Int'l Equivalents AA EN Werkstoff ISO BS 1050A AW-Al1050A 3.0255 Al 99.5 1B Characteristics Excellent corrosion resistance Moderate strength High ductility Very reflective finish Good electrical and thermal conductivity Enquire Now Supplied Shapes Custom Extrusions 1060 Aluminium Int'l Equivalents AA EN ISO UNS 1060 AW-Al99.6 Al 99.6 A91060 Characteristics Excellent corrosion resistance Superb weldability High ductility Good electrical and thermal conductivity Enquire Now Supplied Shapes Plate Sheet Strip Rod Bar Tubes Wire Custom Extrusions 1070 Aluminium Int'l Equivalents AA EN Werkstoff ISO BS 1070 AW-Al99.7 3.0275 Al 99.7 2L 48 Characteristics Excellent corrosion resistance Superb weldability High ductility Good electrical and thermal conductivity Enquire Now Supplied Shapes Plate Sheet Strip Rod Bar Tubes Wire Custom Extrusions 1080 Aluminium Int'l Equivalents AA EN Werkstoff ISO BS 1080 AW-Al1080 3.0285 Al 99.8 1A Characteristics Excellent corrosion resistance Superb weldability High ductility Good electrical and thermal conductivity Enquire Now Supplied Shapes Foil Sheet 1085 Aluminium Int'l Equivalents AA EN ISO 1085 AW-Al99.85 Al 99.85 Characteristics Excellent corrosion resistance Superb weldability High ductility Highly reflective Enquire Now Supplied Shapes Plate Sheet Rod Bar Tubes Forgings 1100 Aluminium Int'l Equivalents AA EN ISO 1100A AW-Al99Cu Al99.0Cu Characteristics Mechanically strongest of 1xxx series alloys Excellent corrosion resistance Superb weldability High ductility Thermal and electrical conductivity highest of all 1xxx series alloys Enquire Now Supplied Shapes 1200 Aluminium Int'l Equivalents AA EN Werkstoff ISO BS 1200 AW-Al99.0 3.0205 Al99.0 1C Characteristics Excellent weldability Superb resistance to atmospheric corrosion Well suited to anodizing High thermal conductivity Largely superseded by 1050A Enquire Now Supplied Shapes Foil Strips 1235 Aluminium Int'l Equivalents AA EN UNS ISO 1235 AW-Al1235 A91235 Al99.35 Characteristics Highly ductile Same chemical composition as 1145, which it now largely supersedes Most common material for foil manufacture Enquire Now Supplied Shapes Plate Sheet Strip Bar Rod Pipes Tubes Custom Extrusions 1350 Aluminium Int'l Equivalents AA EN Werkstoff DIN BS 1350 AW-Al1350 3.0257 E-Al99.5 1E Characteristics High electrical conductivity Excellent weldability Superb ductility Enquire Now Supplied Shapes Plate Blocks Rod Wire 1370 Aluminium Int'l Equivalents AA EN ISO 1370 AW-Al1370 Al 99.7 Characteristics Excellent electrical conductivity Very good weldability Enquire Now Contact us now for more info and pricing Back to Top Supplied Shapes Foil Sheet Wire Rods Custom extrusions 1145 Aluminium Int'l Equivalents AA EN UNS 1145 AW-Al1145 A91145 Characteristics Excellent formability Excellent corrosion resistance Good electrical conducivity Enquire Now Supplied Shapes Wire Rod 1188 Aluminium Int'l Equivalents AA EN UNS AWS A5.10 1188 AW-Al1188 A91188 ER1188 Characteristics 1188 is the preferred welding filler material for 1060, 1070, 1080 & 1350 aluminium alloys, offering excellent post-welding ductility, corrosion resistance and anodized colour matching. Enquire Now Our Other Aluminium Series 2000 Series 3000 Series 4000 Series 5000 Series 6000 Series 7000 Series 8000 Series

Home > Materials > Titanium Titanium In a perfect example of a mineral's true potential not being realised until long after its discovery, Titanium went from being discovered by a Cornish amateur geologist and parish priest, William Gregor, in 1791, to being the material of choice during the jet age of the 1950s. The principle characteristics engineers then, as well as now, appreciate are its high strength with comparably lower mass, its high-temperature operating properties, its resistance to corrosion and, for specific purposes, its bio-compatibility. This means that Titanium will find itself invaluable across the whole spectrum of the engineering industry. Titanium is typically organised into four distinct groups to reflect its varying alloyed states and is organised on this 'site thusly: Commercially Pure/Unalloyed , Alpha and Near-Alpha , Alpha-Beta and Beta . Titanium Grades CPUA Commercially Pure and Unalloyed Titanium Alloys are used in industries where their combined high corrosion resistance and good formability is a necessary requirement, but ultimate strength is not ... Read More Beta Beta Titanium Alloys, with their Body Centred Cubic (BCC) structure, are formed by the addition of sufficient Beta isomorpheous and eutectic stabilising elements Molybdenum, Vanadium, Iron, Niobium, Chromium and Hydrogen ... Read More Alpha & Near-Alpha Alpha and Near-Alpha Titanium Alloys are the traditional high temperature alloys. They have a near-single phase structure, giving them excellent creep characteristics, whilst offering the good strength of Alpha-Beta Alloys (up to 600MPa) ... Read More Alpha-Beta The best of both worlds, Alpha-Beta Titanium Alloys are a dual phase alloy, featuring high compositions of Alpha friendly Aluminium, but with healthy measures of Beta Stabilisers Vanadium, Tantalum, Niobium and Hydrogen, too ... Read More Contact us now for more info and pricing Back to Top TitAnium Shapes Integ Metals supply metals and materials directly to industry. To this end, we have listed the eight most frequently supplied to industries on this page, for the purpose of offering our solutions to each industry. Thereafter you will find the industries, explainations of what their unique demands are, and then outlines of the Pros, Cons and Uses for each of the six most requested materials and their role within the selected industry. Bars & Rods Tubes & Pipes Shapes & Profiles Bars & Rods Sheets & Plates Billets Revert Cast Products Wire Fixings & Fastenings Contact us now for more info and pricing Back to Top Titanium in Industry Integ Metals supply metals and materials directly to industry. For this purpose, we have listed the eight most frequently supplied to industries on this page, with the purpose of offering our solutions to each industry. Thereafter, we have taken the liberty of introducing the industries, explained what their unique demands are, and then outlined the Pros, Cons and Uses for each of the most requested materials and their role within the selected industry. Aeronautical The world of Aeronautics is the single most demanding field, for materials, within engineering. Extremes of temperature, exposure to the elements, not to mention bearing vast masses and G-forces, only the very best materials are used... Read More Energy The energy industry is a test for metallurgy in the breadth of applications required of it. Electrical resistance- and conductivity- thermal resistance, strength, corrosion resistance and nuclear handling are but a few. Renewable energy will ask yet more. Read More Medical The Medical Industry presents some of the keenest challenges for engineering materials. In terms of absolute stress and strain on materials, the medical industry doesn't challenge the Aeronautical Industry, for example... Read More Automotive Material considerations in the automotive industry are more important today than ever before. With higher performance, more stringent safety tests and environmental restraints unheard of a generation ago, it's in materials that gains are found. Read More Leisure From golf clubs to tennis racquets, bicycles to kayaks, performance and health gains can be found in improving the materials used in leisure equipment. Whether it's weight saving, strength gaining, or ease of forming, winning or losing can be decided by material selection. Read More Petrochemical, Oil & Gas The world of Petro-Chemical engineering is unquestionably a most testing industry for engineering materials. Not only is there the severe corrosion threat from chemicals used in the refining of oil into petrol, there's also the fact that oil is often mined at sea... Read More Construction Construction evolution continues to advance at an increasing rate. Where the use of steel allowed us to build skyscrapers in the early 20th century, towering monoliths are built to higher standards in shorter times today, with a wider material selection. Read More Marine The Marine Industry poses a raft of requirements for engineering materials. The first one that comes to mind is the issue of corrosion many materials face in salt water solutions, so a resistance to these events is a must ... Read More Contact us now for more info and pricing Back to Top Our Other Materials Aluminium Nickel Steel Carbon Fibre Aramids