Case-Hardening Steel
Case-hardening is a process applied to low-carbon and, generally, machinable steels to improve their wear resistance and, by leaving a relatively soft core, their toughness and impact resistance, also.
​
Carburising - another name for case-hardening - occurs via a gaseous phase at 825-925℃, usually created when propane or butane is introduced to the heated steel in a sealed furnace and diffuses into the surface to carburize the carbon present in the material's surface. This can then be either quenched or double quenched to increase the depth of carburisation.
​
Case-hardened steels are used to manufacture parts for mechanical engineering purposes, such as gears, cams, valves, timing wheels, pinions, shafts, crankshafts, and con-rods, among others. These are usually supplied in bar form to reflect the fact that they are intended for machining.
Integ Metals supplies all of the grades of case-hardening steels below, in all of the shapes advertised. Please feel free to contact our experts directly for further information, or to place an order.
Case-Hardening Steel
Supplied Shapes
-
Round Bar
-
Flat Bar
-
Hex Bar
-
Square Bar
080M15 (EN32)
Int'l Equivalents
SAE
Werkstoff
ISO
1015, 1016
1.0407, 1.1148
C16, C16E
Supplied Shapes
-
Round Bar
-
Square Bar
655M13 (EN36B)
Int'l Equivalents
SAE
Werkstoff
ISO
3415
1.5752
15NiCr13